Pyronix (FPKX15DT3) 15m Dualtech PIR/Microwave Detector W/ Blue Wave

Pyronix (FPKX15DT3) 15m Dualtech PIR/Microwave Detector W/ Blue Wave

The KX15DT features Dual element pyro-electric sensor with X-band DRO based microwave both of which need to be triggered to set off the Alarm, this reduces the risk of false alarms. With Blue Wave Technology and digital temperature compensation the detector will adjust its sensitivity to the environment.

15m Volumetric detector
15m Volumetric detection coverage. Ideal for protection of rooms, offices etc.

Selectable EOL resistors
The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.

AND/OR technology
AND’ mode operates as a standard dual technology detector. ‘OR’ mode will switch to microwave detection in environments where there is a risk of PIR detection being blocked,

Blue Wave Technology (BWT)
This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of 2 key components: 1). The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges. 2). Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

Auto Sensitivity Feature
Depending on the environment condition, the detector will automatically adjust the sensitivity

Digital Temperature Compensation
When the product is used in a hot environment this technology digitally adjusts the detector’s sensitivity allowing it to maintain its range even when the background room temperature is almost equal to the external body temperature of 32ºC (internal body temperature = 37ºC)

Active self test
If there is no activation after a 5 hour period it will actually self test both the PIR and microwave

Triple LED indication
Microwave - orange, PIR - green, alarm - blue

Microwave Frequencies Bands
3 different frequency bands to avoid interference between detectors are installed in the same room

Key Features:

• Dual element pyro-electric sensor with X-band DRO based microwave
• Selectable EOL (End Of Line) resistors
• AND/OR technology
• Patented Independent Floating Thresholds (IFT)
• Blue Wave Technology
• Auto Sensitivity feature and digital temperature compensation
• Triple LED indication
• Frequency options
• Sealed optics
• Tamper proof brackets included
• Complies with EN50131-1

Technical Specifications:

Electrical

• Operating Voltage : 9 - 16VDC (12V nominal)
• Current Consumption - No Alarm State : 23mA
• Current Consumption - Alarm State : 30mA
• Relay : Solid State
• Relay Output : 60VDC, 50mA, Protected
• Tamper Switch : 12V max, 50mA max
• RFI Immunity to Continuous Wave (CW) 80 – 2000MHz : 75V/m
• RFI Immunity to Amplitude  Modulation (AM) 80 – 2000MHz : 25V/m
• RFI Immunity to Pulse Modulation (PM) 80 – 2000MHz : 25V/m
• DTI approved frequencies: 10.680, 10.687, 10.695GHz
• FCC approved frequencies: 10.515, 10.525, 10.535GHz
• PTT  approved frequencies: 9.87, 9.90, 9.91GHz

Operating Features

• Alarm period of : 2.5 seconds
• Detection Speed : 0.3 - 3m/s
• Operating Temperature : -30°C to +70°C
• Storage Temperature : -40°C to +80°C

Optical

• White Light Filter : 6500 Lux
• Optics : Sealed
• Lens : Fresnel array, ‘Grooves in’ infrared compensated
• Protection : Ultraviolet Light Filter
• Tilt Adjustment : 0°-12°

Mounting

• Optimum Coverage Height : 1.8-2.4m