PowerWalker VI 2200SE LCD/UK IEC UPS (1200W)

PowerWalker VI 2200SE LCD/UK IEC UPS (1200W)

The PowerWalker VI 2200SE LCD IEC is a Line-Interactive UPS which provides high performance, reliable and cost-effective backup power protection. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ11/RJ45 surge protection. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or SMB application.

Key Features:

• Super smart charger to shorten charging time.
• Built-in boost and buck AVR.
• Simulated sine wave.
• Auto restart while AC is recovering.
• Off-mode charging.
• Cold start function.
• USB communication port.
• RJ-11 / RJ45 surge protection.
• Includes monitoring software.
• LCD display for status view.

Technical Specifications:

General features

• Capacity : 2200VA / 1200W

Input

• Voltage: 230VAC
• Voltage Range: 170-280VAC ± 7%

Output

• Voltage: 230VAC
• Voltage Regulation - (Battery mode) ± 10%
• Frequency 50 or 60Hz
• Freq Regulation Battery mode: ± 1 Hz
• Waveform: Simulated Sine Wave

Transfer Time : Typical: 4-8 ms

Battery

• Type: 12V / 9Ah
• Quantity: 2
• Recharge Time: 6h to 90% after complete discharge

LCD Display Indicators : AVR Mode, Battery Mode, Load Level, Battery capacity, Input voltage, Output voltage, Overload alarm, Fault Alarm, Low Battery Alarm

Audio Indicators

• Battery mode: Beep every 10 seconds
• Low Battery: Beep every second
• Fault: Continuous Beep
• Overload: Beep every 0.5 sec

Full Protection

• Discharge prevention: Yes
• Deep discharge: Yes
• Overcharge: Yes
• Overload: Yes

Connections

• Communication: USB
• Outlets: 6 x IEC
• Protection Port: RJ11/RJ45 in/out

Software

• Software: WinPower
• Other: 1 x USB Port

Dimensions : 365 x 139 x 195mm
Weight : 10.4 KG
Package Contents : PowerWalker VI 2200SE LCD/IEC, Input Power Cable, IEC Cable, Software CD, USB Cable, Manual