Elmdene GEN3-08-A, 12V DC 1.0 Amp Grade 3 PSU Box (Type A - Hinge Lid)
- Brand:Elmdene
- Product Code:GEN3-08-A
- Availability:Please Call or Email to Checkout
Elmdene GEN3-08-A, 12V DC 1.0 Amp Grade 3 PSU Box (Type A - Hinge Lid)
12V d.c. Switch Mode PSU(13.8V) 1.0A to load + additional current for battery charging. Grade 3 Intruder systems. Mains, Battery and PSU volt free fault outputs. Deep discharge protection. Diagnostic LEDs. Lid & rear tamper. Low quiescent battery standby current. Fit up to 7Ah battery. 'A' Box: 200h x 230w x 80d - Hinge lid
GEN Features:
- High Efficiency Switch Mode Operation
- Comprehensive Battery Management
- Deep Discharge Protection
- Battery Fault Detection (Grade 3)
- High Efficiency 3 Stage Charging (18Ah)
- Dedicated Fault Outputs
- EPS Fault (mains fail)
- APS Fault (battery fault) (Grade 3)
- PSU Fault (general fault)
- Internal LED PSU Status
- High Security Front and Rear Tamper (Grade 2 front only)
- Full Rated Current To Load + Battery Charging
- Electronic Overload Protection
- Mains Transient Protection
Specifications:
| Output (mains on) |
13.8V dc nominal |
| Load Output | 08 Maximum 1.0A - 12 hours @ 580/660mA (7/8Ah) |
| Mains Supply | 90V - 265V a.c @50/60Hz |
| Environment |
-10C to 40C @ 95%RH |
| Enclosure | |
| Type A | 200H x 230W x 80D - hinge lid |
| Box Sizes for battery | |
| '08' models | 1 x 7 or 8Ah 1.0A** |
| *Communication devices will fit into a 'B' size box when used with a 7/8Ah battery. | |
| **Full current to load plus additional current to charge standby battery | |
GEN range Complies with the following standards::
EN50131-6:2008 GEN2 –Grade 2 GEN3 – Grade 3 All Environmental Class II
Optional Order Related to this Item Available on Request:
| PART NO | DESCRIPTON |
| GEN3-08-F | 12V d.c. Switch Mode PSU (13.8V) 1A to load + additional current for battery charging. Grade 3 Intruder systems. Mains, Battery and PSU volt free fault outputs. Deep discharge protection. Diagnostic LEDs. Lid & rear tamper. Low quiescent battery standby c |