Genie, UKP-EM, Water Resistant Keypad / Reader / Controller

Genie, UKP-EM, Water Resistant Keypad / Reader / Controller

Single Door Multifunction Keypad or Card Reader Housed in a Strong, Sturdy & Vandal Resistant Zinc Alloy Electroplated Case, Weatherproof as Electronics are Fully Potted, Conforms to IP67. Suitable for Mounting Indoor, Outdoor or in Harsh Environments.

Key Features:

• Water Resistant, Conforms to IP67
• Strong Zinc Alloy Electroplated Anti-Vandal Case
• Two Relay Operation
• 2,100 Users & 10 Groups for Duress PIN/Card
• Zone 1 : Up to 2,000 PIN & Card Holders
• Zone 2 : Up to 100 PIN & Card Holders
• Both Relay Zones Can be Programmed for 3 Modes : Card, PIN, Card & PIN for Standalone Mode
• Reads Both EM & HID 125KHz Cards
• PIN Length 4 ~ 8 Digits
• Pulse Mode or Toggle Mode Options
• Wiegand 26 ~ 37 Input & Output
• Can Operate as a Reader or Controller
• Dual Relay Outputs for Door Opening, Door Status Detection, Exit Button Connection
• Card Block Enrolment
• Manager Cards for Individually Adding or Deleting Card Users
• Low Power Consumption (25mA)
• Blue Back Lit Keypad
• Back Light & Keypad Tone Can be Disabled
• Supports Door Bell Connection (Zone 2)
• Built In Light Dependent Resistor (LDR) for Anti Tamper
• Built In Buzzer
• Red, Yellow, Green & Blue Status LED
• DC12 ~ 24V or AC12 ~ 18V

Note:
For Wiegand Mode, the keypad can be used for EITHER Card OR Pin – NOT both. Wiegand data is sent on a first come first send basis. If you show the Card and then the Pin, the keypad will transmit the Card ID immediately and then the Pin number as a Wiegand ID straight after that. For this reason Card & Pin are not relevant in Wiegand mode but only useful in Standalone mode. In Wiegand mode, PIN Number = Wiegand ID that your 3rd party controller will see.

Technical Specifications:

• User Capacity: 2100 & 10 Additional Groups for Duress - PIN/Card
• Keypad: 12 Keys, 3 x 4 Digits
• Card Type: EM & HID 125KHz Cards / Fobs
• RF Card Reading Distance : 3-6 cm
• Active Current Draw: ≥60mA
• Idle Current Draw: ≥25mA
• Lock Relay Output Load: Max 2A
• Alarm Relay Output Load: Max 20A
• Envionmental Rating: IP67
• Adjustable Door Relay Time: 1-99 Seconds
• Adjustable Alarm Time: 0-3 Minutes
• Wiegand Interface: Wiegand 26 or 37 Bit Input & Output
• Wiring Connections: Electric Lock, Exit Button, DOTL, External Alarm
• Operating Voltage: DC12 - 24V or AC12 - 18V
• Operating Temperature: -20°C to +60°C
• Operating Humidity: 10% - 90% RH
• Dimensions (L x W x H): 128 x 82 x 28 mm

Contact us on sales@hunters-wholesalers.co.uk for more specific product information and pricing installation and training.